수직천공기(Vertical Drilling M/C)

Model: SZK2500-2 * Technical Parameters
(1) Numerical Control Vertical Drilling Machine SZK2550
This machine adopts computerized control(본 기계는 수치제어방식을 적용함). The worker only have to input the drilling position, lay the glass on the synchronous conveying belt, press start button and it will finish drilling by itself. It will stop automatically after drilling.(작업자는 단지 구멍의 위치만 입력하고, 동조구동벨트위에 유리를 놓은후, 시작버튼을 누르면 자동으로 천공작업을 실행하고 동작을 스스로 맞춤).

With the combination of touch screen and PLC control, the color display of operation interface and mouse control operation, the machine has reliable properties, high precise and is easy to operate, suitable for batch production with multi-hole of large flat glass. (터치 스크린과 PLC의 조합으로 신뢰성있게 정밀하고 쉽게 대형판유리에 다수의 구멍을 생산하기 적합한 기계임)

Technical ParametersL(기술자료)

Max Glass size(최대유리 사이즈) 5000x2500mm

Min glass size (최소유리 사이즈) 500x500mm

Thickness of glass (작업유리두께) 5-25mm

Hole diameter (천공 직경) 4-100mm

Position precise of drilling (천공위치정밀도) ±0.50mm

Point precise of front and back drilling bits (전후 천공단차 정밀도) ±0.15mm

Air pressure(필요 공압) 0.6-0.8Mpa

Power supply(필요 전력) AC380V 60Hz

Total power(총 소요동력) 7.5KW

Overall dimension(기계제원) 8000x1350x3700mm


(2) Double-head Numerical Control Vertical Drilling Machine SZK2550-2
This machine adopts computerized control. The worker only have to input the drilling position, lay the glass on the synchronous conveying belt, press start button and it will finish drilling by itself. It will stop automatically after drilling.

With the combination of touch screen and PLC control, the color display of operation interface and mouse control operation, the machine has reliable properties, high precise and is easy to operate, suitable for batch production with multi-hole of large flat glass.

Technical Parameters:
Max Glass size 5000x2500mm
Min glass size 500x500mm
Thickness of glass 5-25mm
Quantity of drilling bit 2 couple
Hole diameter 4-100mm
Position precise of drilling ±0.50mm
Error of diagonal line ±1.0mm
Axiality of front and back drilling bits ±0.10mm
Air pressure 0.6-0.8Mpa
Power supply AC380V 50Hz
Total power 11.5KW
Overall dimension 8000x1400x4000mm